Industrial wastewater
Review liquid composition and solids by model.
MCKARLEN VIETNAM · ENGINEERING SOLUTIONS
Classify liquid, solids, sump, inflow and installation conditions before selecting suitable submersible or drainage pump equipment.
01 · APPLICATION CONTEXT
Review liquid composition and solids by model.
Review usable volume, switching levels and pump count.
Assess rainwater, mud/sand and portable installation conditions.
Consider BL only within source-supported drainage contexts and by model.
02 · ENGINEERING CHALLENGES
Size, fibrous content, density and clogging risk are unknown.
Dimensions, levels, inflow and pumping cycle are missing.
Pipe, valve, elevation and discharge losses are omitted.
Corrosion, abrasion, temperature and chemicals require material review.
03 · REQUIRED PROJECT DATA
| Liquid | Source, composition, temperature, pH when known, solids and material needs. |
|---|---|
| Hydraulics | Inflow, required flow, elevations, piping and discharge point. |
| Sump / installation | Sump dimensions, levels, guide-rail/portable arrangement and maintenance access. |
| Electrical / controls | Supply, pump count, alternation, level alarms and protection. |
04 · ENGINEERING APPROACH
05 · PRODUCT ROLE
ACI for industrial wastewater; HDP/GV for model-controlled wastewater and drainage; KT for dewatering; BL for source-supported large-volume drainage contexts. No combined family-wide performance range is stated.
Use only after duty, liquid, model and configuration are confirmed.
Use only after duty, liquid, model and configuration are confirmed.
Use only after duty, liquid, model and configuration are confirmed.
Use only after duty, liquid, model and configuration are confirmed.
Use only after duty, liquid, model and configuration are confirmed.
SELECT BY APPLICATION
Select by liquid conditions and duty point, not just motor power or flow.
The catalogue identifies ACI as a submersible sewage pump family, with flexible-pipe, rigid-pipe or automatic coupling installation depending on configuration. Replacement requires checks of the liquid, solid size, duty point and installation compatibility.
BL and KL are catalogue families of high-volume axial / mixed-flow submersible pumps for applications such as drainage, irrigation and aquaculture. For liquids containing sand, solids or fibrous debris, confirm the limits of the individual model. High flow alone does not establish suitability for every type of wastewater.
Site and existing pump nameplate photos, liquid composition, required flow, total head, pipe diameter and length, power supply, water levels and installation arrangement.
Start with the inflow source, collection point and discharge location. Select against the liquid, flow at total head and installation conditions.
Water enters the workshop or basement ramp; the sump rises while the pump runs; pumps clog or flow falls; existing equipment needs replacement or standby pumping.
Photographs of inflow, sump and pump nameplate; sump dimensions and water levels; solids or debris; discharge point, elevation difference, pipe length and diameter; power supply. Add design flow, total head and drawings where available.
Review inflow and collection first, then the pump, discharge pipe, backflow prevention and level control. Consider standby pumping, high-level alarms and power according to the project. Discharge onto the street is not a default solution.
Distinguish floodwater, sand-laden water and sewage. KT is grouped under construction dewatering in the technical documentation; ACI is a submersible sewage pump family; BL/KL address high-volume duties. Sand, fibres, oil or chemicals require individual model-limit checks. Do not substitute by motor power alone.
Drainage depends on inflow, discharge water level, piping losses and power. A catalogue does not demonstrate flood protection for the whole property. Design, installation and acceptance remain subject to agreed project responsibilities.
No. Check flow at the required total head on the performance curve.
Check inflow, actual duty point, blockages, discharge water level and system condition.
Only where the liquid and operating conditions are within model limits. Check solids, debris and fibres first.
06 · RESPONSIBILITY CONTROL
07 · DOCUMENT CONTROL
Release only the confirmed family, model and revision. Legacy catalogues or documents with obsolete identity are not converted into public downloads.
08 · EVIDENCE GATE
No project record currently meets the evidence and usage-right threshold for publication on this page. No Project Case card is created until that evidence exists.
09 · KNOWLEDGE
No. Flow, head, liquid, solids, sump and operating pattern are needed.
No. Liquid, solids and materials must be confirmed by model.
It should not be. The source supports specific drainage and other named contexts only.
Only with sufficient evidence, usage rights and approved wording.
10 · VIETNAM SUPPORT
Support covers data intake, duty review, model selection, technical documents, spare parts, warranty and after-sales within the supplied-equipment scope.
11 · PROJECT ENQUIRY