MCKARLEN · GV · 50 Hz
GV Series
Submersible vortex pumps for solids-bearing wastewater in collection pits, basements and factories. Select by flow, total head, particle size and power supply.

Applications and design
Collection pits and basements
Check incoming flow, control water levels, discharge piping and standby requirements.
Buildings and factories
Assess wastewater composition, particle size and material compatibility.
Vortex impeller
Vortex configuration; solids passage does not establish suitability for every type of debris.
Technical data and operating limits
| Liquid | Wastewater / drainage water · pH 6–8 · maximum 40 °C |
|---|---|
| Depth / protection | Maximum 8 m · IP68; confirm submerged operating conditions by model |
| Solids passage | 10–50 mm by model in the catalogue table |
| Discharge / power supply | 32–100 mm · 50 Hz · single / three phase by model; check nameplate voltage |
| Materials | FC200 impeller and casing · SUS304 motor housing · SUS410 shaft, per catalogue configuration |
| Duty point | Use the exact model Q–H curve; Qmax and Hmax are not simultaneous |
Abrasive sand, fibrous debris and chemicals require separate assessment. ACI and HDP are not automatic replacements for GV.
Technical documents
Pump selection / spare parts
Send flow, total head, wastewater source, solids type and size, sump dimensions and power supply. For replacement or spares, include nameplate, discharge and existing connection photos.











