NSZ Series

NSZ Series

NSZ Series là thuộc dòng bơm hồ bơi cỡ lớn có thể lọc nước cho bể bơi hoạt động dựa theo nguyên tắc nước được đẩy vào bể bơi từ đầu nông và hút ra từ đầu sâu. Máy được lắp đặt sao cho bộ lọc có thể phát huy được tối đa công suất lọc nước. Bơm NSZ giúp lọc sạch nước trong bể bơi mà không cần phải thay nước, giúp tiết kiệm thời gian, công sức để thay nước hồ bơi; giúp nước được lưu thông tuần hoàn, sạch sẽ đảm bảo an toàn cho người bơi

Danh mục: ,

TYPICAL APPLICATIONS

Water circulation and filtration inlarge swimming pools

MATERIAL

-Pump body-impeller-filter: stainless steel aisi 304

-Pump shaft: stainless steel aisi 304

-Mechanical seal: graphite/siliconcar-bide

-Rubber parts : nbr

MOTOR

380v 50hz

Tefc secondary

Motor protection

Class: 55

Insulation class: F

WORKING CONDITION

Liquid temperature: -20 ~ 100°C

Ambient temperature: ≤40°C

System pressure: ≤10 bar

CURVE CONDITION

-Following conditions are suitable forperformance curve below.

-Curve tolerance in conformity to ISO9906:2012, Grade 3B.

-All curves are based on measured valuesunder motor speed 2900rpm or 2950rpm.

-Measurement is done with 20°C air-freewater,kinematic viscosity of 1mm2/sec.

MATERIAL

NSZ stainless steel horizontal single stageswimming pool pump, are made byadvancedprocessing like stainless steel plate stampingand bulging welding technology.It canreplacetraditional casting pool pumps.

It is highefficient, energy saving, light corrosionresistant with beautiful appearance, light butcompact structure, low noise and longdurability.

Sản phẩm tương tự

SWM Series

HSS Series

KT Series

CA

HCR Series

VIS Series

CM Series

CI Series

NSZ Series

NSZ Series

NSZ Series is a large pool pump that can filter water for swimming pools operating on the principle that water is pushed into the pool from the shallow end and sucked out from the deep end. The machine is installed so that the filter can maximize the water filtration capacity. The NSZ pump helps to clean the water in the swimming pool without having to change the water, saving time and effort to change the pool water; helps the water to be circulated, clean and safe for swimmers.

Danh mục: ,

TYPICAL APPLICATIONS

Water circulation and filtration inlarge swimming pools

MATERIAL

-Pump body-impeller-filter: stainless steel aisi 304

-Pump shaft: stainless steel aisi 304

-Mechanical seal: graphite/siliconcar-bide

-Rubber parts : nbr

MOTOR

380v 50hz

Tefc secondary

Motor protection

Class: 55

Insulation class: F

WORKING CONDITION

Liquid temperature: -20 ~ 100°C

Ambient temperature: ≤40°C

System pressure: ≤10 bar

CURVE CONDITION

-Following conditions are suitable forperformance curve below.

-Curve tolerance in conformity to ISO9906:2012, Grade 3B.

-All curves are based on measured valuesunder motor speed 2900rpm or 2950rpm.

-Measurement is done with 20°C air-freewater,kinematic viscosity of 1mm2/sec.

MATERIAL

NSZ stainless steel horizontal single stageswimming pool pump, are made byadvancedprocessing like stainless steel plate stampingand bulging welding technology.It canreplacetraditional casting pool pumps.

It is highefficient, energy saving, light corrosionresistant with beautiful appearance, light butcompact structure, low noise and longdurability.

Sản phẩm tương tự

HCR Series

VIS Series

HSS Series

CA Series

CI/CM Series

KT Series

SWM Series

CI Series

zalo
❄